lathe
high speed precision lathe:FL-S430,S480, S530,M560,M660 series
分享到:
MODEL
FL-S430
FL-S480
FL-S530
FL-M560
FL-M660
560
760
1000
1500
2200
1000
1500
2200
Swing over bed
430mm(16-7/8")
470mm(18-1/2")
520mm(20-7/16")
560mm(22")
660mm(25-15/16")
Swing over cross slide
240mm(9-7/16")
280mm(11")
330mm(12-15/16")
340mm(13-3/8")
440mm(17-5/16")
Center height
215mm(8.465")
235mm(9.252")
260mm(10.236")
280mm(11.024")
330mm(12.992")
Distance between centers
510mm
(20")
690mm
(27-1/8")
940mm
(37")
1440mm
(56-5/8")
2200 mm
(86-1/2")
1000mm
(39-3/8")
1500mm
(59")
2200mm
(86-1/2")
Swing over gap
650mm (25-9/16")
690mm(27-1/8")
740mm (29-1/8")
788mm(31")
890mm(35")
Bed width
300mm(11.811")
350mm(13.780")
Spindle nose
ASA D1-6/D1-8(opt.)
ASA D1-8
ASA D1-8
Spindle bore
58mm(2.283") / 80mm(3.150")(opt.)
80mm(3.150")
85mm(3.346") / 105mm(4.134")(opt.)
Taper of spindle bore
MT 6 / MT7(opt.)
MT7
Spindle speed
20~2000r.p.m.(12 steps)-spindle bore:58mm/
40~2000r.p.m.(12 steps)-spindle bore:80mm
15~1500r.p.m. (12 steps)(Ø85mm bore)/
14~1380r.p.m.(12 steps)(Ø105mm bore)
Inch threads range
4~56 T.P.I.
2~56 T.P.I.
Metric threads range
P 0.5~7mm
P 0.5~14mm
Longitudinal feeds range
0.05~0.82mm(0.002~0.032")
0.05~0.82mm(0.002~0.032")
Cross feeds range
0.02~0.4mm(0.001~0.0094")
0.02~0.4mm(0.001~0.0094")
Leadscrew diameter
35mm(1.378")
38mm(1.496")
Leadscrew pitch
4 T.P.I. or 6mm
4 T.P.I. or 6mm
Taper of tailstock center
MT 4
MT 5
Tailstock quill travel
150mm(5-7/8")
165mm(6-1/2")
Tailstock quill diameter
58mm(2.283")
68mm(2.677")
75mm(2.953")
Main drive motor
5HP(3.75KW)/
7.5HP(5.625KW(opt.)
7.5HP(5.625KW)/
10HP(7.5KW)(opt.)
7.5HP(5.625KW)/
10HP(7.5KW)(opt.)
Coolant pump
1/8HP(0.1KW)
1/8HP(0.1KW)
Compound rest travel
125mm(4-7/8")
200mm(7-7/8")
Cross slide travel
245mm(9-5/8")
275mm(10-13/16")
300mm(11-13/16")
Net weight (kgs)
1500 / 1680 / 1760
/ 2050 / 2405
1540 / 1720 / 1800
/ 2075 / 2465
1580 / 1760 / 1810
/2135 / 2525
2200 / 2400
/ 2750
2250 / 2450
/ 2800
The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.