1702 x 410mm (67" x 16-1/8")
(or 1702 x 510mm
(67" x 20-1/16"), opt.)
1900 x 410mm
(74-13/16" x 16-1/8")
(or 1900 x 510mm
(74-13/16" x 20-1/16"), opt.)
T-slots (size x number x pitch)
18mmx4x70mm (0.708" x 4 x 2.755")
Max. table load
1200kgs (2652 lbs)
1500kgs (3315 lbs)
TRAVEL
Longitudinal travel (X axis)
1400mm (55")
1600mm (63")
Cross travel (Y axis)
600mm (23-5/8")
650mm (25-5/8")
Vertical travel (Z axis)
700mm (27-5/8")
Distance from spindle end to table
100 ~ 800mm (3-7/8" ~ 31-1/2")
Distance from spindle center to column
650mm (25-5/8")
SPINDLE
Spindle nose taper
NT40
Spindle speeds
Inverter operated vari 85 ~ 3600 r.p.m. ; High/Low gear
Quill travel
140mm (5-1/2")
Quill dia.
Ø110mm (4-5/16")
Quill feeds per revolution of spindle
0.035 , 0.07 , 0.14 mm/rev.
Swiveling angle of head (R&L)
45°
FEED
Cutting feed rate
vari, 10~3000 mm/min. (X, Y & Z axes)
Rapid traverse
4800 mm/min (X, Y & Z axes)
MOTOR
Spindle drive motor
7-1/2HP
X, Y axes motor
DC servo 4.5 Nm
Z axis motor
DC servo 4.5Nm
Coolant pump
1/6HP
DIMENSION
Machine size
2280 x 2120 x 2520 mm
(89-3/4" x 83-7/16" x 99-3/16")
2390 x 2240 x 2520 mm
(94" x 88-3/16" x 99-3/16")
Machine weight
3800kgs (8398 lbs)
4000kgs (8840 lbs)
The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.
