Bed type precision milling machine FM-185L

 

分享到:
 

MODEL

FM-185L

TABLE

Working surface

1470 x 305mm (57-7/8" x 12 ")

T-slots (size x number x pitch)

16mmx3x63mm (0.630" x 3 x 2.480")

Max. table load

600kgs (1326 lbs)

TRAVEL

Longitudinal travel (X axis)

1040mm (40-7/8")

Cross travel (Y axis)

500mm (20")

Vertical travel (Z axis)

560mm (22-1/16")

Distance from spindle end to table

45 ~ 605mm
(1-3/4" ~ 23-13/16")

Distance from spindle center to column

565mm (22-1/4")

SPINDLE

Spindle nose taper

NT40

Spindle speeds 

Mechanical operated or inverter operated (opt.) vari 50 ~ 3600 r.p.m. ; High/Low gear

Quill travel

120mm (4-3/4")

Quill dia.

Ø105mm (4-1/8")

Quill feeds per revolution of spindle

0.04 , 0.08 , 0.14 mm/rev.
(0.0015" , 0.0030" , 0.0055")

Swiveling angle of head (R&L)

45°

FEED

Cutting feed rate

vari, 25 ~1200mm/min (X, Y & Z (opt.) axes)

Rapid traverse

2000 mm/min (X, Y & Z (opt.) axes)

MOTOR

Spindle drive motor

5 HP or 7-1/2 HP (opt.)

X, Y axes motor

Inverter operated
1/2HP reduction gear motor

Z axis motor

1/2 HP (power up/down ) or inverter operated, 1/2HP reduction gear motor (opt.)

Coolant pump

1/8 HP

DIMENSION

Machine size

1750x2430x2520 mm
(68-7/8"x95-5/8"x 99-3/16")

Machine weight

2350kgs (5170 lbs)

  • The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.