mill
VERTICAL TYPE TURRET MILLING MACHINE FM-4~6KVA/KVS/KIV
分享到:
MODEL
FM-4KVA
FM-4KVS
FM-4KIV
FM-5KVA
FM-5KVS
FM-5KIV
FM-6KVA
FM-6KVS
FM-6KIV
TABLE
Table size
1270x254mm (50"x10") 1370x254mm (54"x10")(opt.)
1370x305mm (54"x12") 1524x305mm(60"x12")(opt.)
No. of T-slots
3
T-slots width
16
Slideway hardened & surface ground
YES
Table surface hardened & ground
YES
Slideway "dovetail" or "square"
X Axis : Dovetail
Y/Z Axes : Square
MANUAL TRAVELS
X axis
800mm (31-1/2")
915mm (36")
(w/opt. 54"x10" table)
800mm (31-1/2") 1100mm(43-5/16")
(w/opt. 60"x12" table)
Y axis
380mm(15")
430mm(17")
380mm(15")
Z axis
430mm(17")
520mm(20-7/16")
480mm(18-7/8")
Distance from spindle nose to table surface
50~480mm (2"~18-7/8")
50~570mm (2"~22-7/16")
50~530mm (2"~20-7/8")
Distance from spindle center to column
120~660mm
(4-11/16"~26")
220~750mm
(8-5/8"~29-1/2")
Travel reduced with power feed
60mm (X axis)
None
Head swivel angle (R/L)
±90°
Head tilting angle (up/down)
±45°
Ram travel
508mm(20") / 530mm (20-13/16")(NT40)
530mm(20-13/16")
SPINDLE
Main motor
3HP / 5HP(opt.)
5HP
Spindle speed r.p.m.
(For KVA models)
(Step pulley)
8 Nos. 70~2310 r.p.m.(50HZ), 80~2720 r.p.m.(60HZ)
16 Nos. 70~4620 r.p.m.(50HZ), 80~5440 r.p.m.(60HZ)
Spindle speed r.p.m.
(For KVS models) (Mechanical variable)
60~3600 r.p.m(50HZ)
70~4200 r.p.m(60HZ)
Spindle speed r.p.m.
(For KIV models)
(Inverter variable)
70~4200 r.p.m.(50/60HZ)
Spindle taper
R8 or NT30, NT40(opt.)
NT40
Spindle travel
127mm(5")
Quill feed rate
0.04, 0.08, 0.15 mm/rev
Quill diameter
85.7mm(3-3/8") /
100mm(3-15/16")(opt.)
100mm(3-15/16")
Machine net weight
1050 kgs
1300 kgs
1400 kgs
The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.