CW-10

 

分享到:

MODEL

CW-10

MACHINE UNIT SPECIFICATION

Machining method Submerge / Flushing
Max. workpiece size (W x D x H)  mm 680x420x150
Max. workpiece weight kg 250
X, Y axes travel mm 300x200
Z axis travel mm 150
U, V axes travel mm ±30x±30
X-Y axes feed rate mm/min Max. 900
Best surface roughness µm Ra 0.65
Drive motor (X, Y, U, V) AC Servo Motor
Wire diameter (standard) mm Ø0.25 (Ø0.15-Ø0.3)
Wire feeding speed m/min 0-15
Wire tension gf 200-2500
Max. taper angle degree ±15°/80
Max. wire bobbin weight kg 6
Outside dimensions (W x D x H) mm (S)850x573x375
(F)920x573x400
Machine weight kg 1500

WORKING FLUID SUPPLY UNIT

Tank capacity (liter) l 480 / 420
Filter element Paper filters
Ion exchange resin l 15l
Conductivity control system Standard
Fluid temperature control (With coolant) Auto. (optional)
Outside dimensions (W x H x D) mm (S)1100x1400x1290
(F)950x1400x1290
Net weight (without water) kg 200

POWER SUPPLY UNIT

Circuit system Power MOS transistor
Max. outpt current A 25
Voltage select V 145
IP select 10
Off time select 50

CNC UNIT

I/O device Keyboard, RS-232C, CF CARD
Display type 15"LCD-TFT
Control system 32 bit, 1-CPU, closed loop software servo system
Control axis X, Y, U, V, Z
Min. setting unit mm 0.001
Max. command value mm ±9999.999
Interpolation Linear / Circular
Command system Abs. / Incl.
Machining feed control Servo / Const. Feed
Scaling 0.001~9999.999
Auto 2nd cut system Re-trace and auto changed machining data
Machining condition memory 0-9999
Outside dimensions (W x H x D) mm 600x870x1850
Total AC power input KVA 3Ø220V ±10% / 13KVA
                                    ˙All specifications and design are subject to change without prior notice.