mill
Bed type precision milling machine FM-200N
分享到:
MODEL
FM-200N
TABLE
Working surface
1400 x 450mm (55-1/8" x 17-11/16")
or 1600 x 450mm (63" x 17-11/16")(opt.)
T-slots (size x number x pitch)
18mmx3x100mm (0.708" x 3 x 3.937")
Max. table load
1000kgs (2210 lbs)
TRAVEL
Longitudinal travel (X axis)
1000mm (39-3/8")
or 1200mm (47")(opt.)
Cross travel (Y axis)
550mm (21-5/8")
Vertical travel (Z axis)
600mm (23-5/8")
Distance from spindle end to table
100 ~ 700mm (3-15/16" ~ 27-9/16")
Distance from spindle center to column
570mm (22-7/16")
SPINDLE
Spindle nose taper
NT40
Spindle speeds
75 ~ 3500 r.p.m. (60HZ) (10 steps)
or vari 55 ~ 3600 r.p.m. ; High/Low (Inverter)(opt.)
Quill travel
140mm (5-1/2")
Quill dia.
Ø105mm (4-1/8")
Quill feeds per revolution of spindle
0.04 / 0.08 / 0.15 mm/rev.
(0.0015" , 0.0030" , 0.0059")
Swiveling angle of head (R&L)
45°
FEED
Cutting feed rate
1 ~1500mm/min (max.)(3 axes)
Rapid traverse
1.8m/min (max.)(3 axes)
MOTOR
Spindle drive motor
3.75KW (5HP)
X, Y axes motor
AC servo 0.75KW
Z axis motor
AC servo 0.75KW
Coolant pump
AC 1/8 HP
DIMENSION
Machine size
3150 x 2350 x 2650 mm
(124" x 92-1/2" x 104-5/16")
Machine weight
3300kgs (7293 lbs)
The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.