mill

VERTICAL TYPE TURRET MILLING MACHINE FM-1-1/4~1-1/2VA/VS 3KVA/KVS

分享到：

MODEL	FM-1-1/4VA FM-1-1/4VS	FM-1-1/2VA FM-1-1/2VS	FM-3KVA FM-3KVS
TABLE
Table size	889x228mm (35"x9")	1067x228 mm (42"x9") or 1244x228mm(49"x9")	1270x254mm (50"x10") 1370x254mm(54"x10")(opt.)
No. of T-slots	3
T-slots width	16
Slideway hardened & surface ground	YES
Table surface hardened & ground	YES
Slideway "dovetail" or "square"	X/Y/Z Axes : Dovetail
MANUAL TRAVELS
X axis	610mm (24")	700mm (27-1/2") 860mm (33-13/16") (w/opt. 49"x9" table)	800mm (31-1/2") 915mm (36") (w/opt. 54"x10" table)
Y axis	300mm(11-13/16")	330mm(13")	380mm(15")
Z axis	380mm(15")	410mm(16-1/8")	430mm(17")
Distance from spindle nose to table surface	50~430mm (2"~17")	50~460mm (2"~18-1/8")	50~480mm (2"~18-7/8")
Distance from spindle center to column	140~450mm (5-1/2"~17-11/16")	160~490mm (6-5/16"~19-5/16")	140~660mm (5-1/2"~26")
Travel reduced with power feed	40mm	60mm (X axis)
Head swivel angle (R/L)	±90°
Head tilting angle (up/down)	±45°
Ram travel	310mm(12-3/16")	350mm(13-3/4")	508mm(20")
SPINDLE
Main motor	2HP	3HP	3HP / 5HP(opt.)
Spindle speed r.p.m. (For VA and KVA models) (Step pulley)	8 Nos. 70~2310 r.p.m.(50HZ), 80~2720 r.p.m.(60HZ) 16 Nos. 70~4620 r.p.m.(50HZ), 80~5440 r.p.m.(60HZ)
Spindle speed r.p.m. (For VS and KVS models) (Mechanical variable)	60~3600 r.p.m(50HZ) 70~4200 r.p.m(60HZ)
Spindle taper	R8 or NT30		R8 or NT30, NT40(opt.)
Spindle travel	127mm(5")
Quill feed rate	0.04, 0.08, 0.15 mm/rev
Quill diameter	85.7mm(3-3/8")
Machine net weight	650 kgs	950 kgs	1000 kgs

The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.